E-bike Display 24/36/48V 72V LCD8H Electric Bike Display for Ebike Controller SM

  
The brand of this display is KT, it only matches the KT controller. LCD8H WP cable length about 25cm. If you want to connect the controller, you need a 1to4 cable. About 25cm(WP), About 180cm (SM) including the connector. It shows the riding speed, a single mileage and cumulative mileage, riding time, power-assist gear, motor power and temperature, battery voltage and charge status, brake status and the used ambient temperature and other cycling parameters.

A true reflection of the battery charge, real-time recording of the power consumption to ensure riding mileage. Multi-gear switch and automatic save of the power-assist gear, and it can restore power-off stall state when turned on.

With a number of user parameter setting functions, motor parameters, velocity measurement parameters, speed-limit parameters, power parameters, power-assist control parameters, the minimumcontroller voltage and maximum current parameters and other operating models for settings adjustment. Users can view historical driving data and clear accordingly, view single or cumulative riding time, riding mileage, maximum speed and average speed of single riding.

With 6Km/h power-assisting functions, the boost logo flashes during boosting, and riders can use it when driving the vehicle and the vehicle driving is labor-saving and easy. With the functions of LCD backlit display and headlight switch control, instrument backlighting and headlights can be turned on during driving at night. With three-bit of power-on password setting.

For the appeared failure of the vehicle, it can prompt different fault codes for easy inspection and maintenance of vehicle. With a temperature display for motor operation and it is to achieve the ultra-temperature alarm and motor protection. Use five-line of digital communication, the instrument has good compatibility and interchangeability, different instruments can be conducted the data exchanges and parameters copy directly.

Host part and operation buttons of the meter use sub-structure design, making the operation to be more reasonable and convenient. Supply voltage of 24V/36V/48V can be automatically identified and compatible.